IDPC HomeIDPC Links PageContact IDPCDSL ADSL ADSL2 SDSL VDSL Modems Routers and HardwareIDPC FAQsIDPC and Your Privacy

Used New Cisco, Used New Adtran, Used New Alcatel, Used New 3Com, Used New Juniper, Used New Lucent, Used New Motorola, Used New Nortel

DCE DSP Modems

Data Connect 19.2 bps DSP Modems

Data Connect DSP 19.2
Data Connect DSP19.2 Data Sheet

This modem has been replaced by:

High-Speed Fast-Poll Modem for Industrial Communications

The DCE Fast Poll modem is designed and manufactured from the ground up for rugged industrial communication networks. Boasting the latest innovative digital signal processing (DSP)-based communication device, the DSP19.2FP delivers a cost-effective 19200 bps asynchronous solution for point-to-point and multipoint connectivity. The  DSP19.2FP Fast-Poll modem is ideal for industrial communication applications including SCADA systems, RTUs, traffic monitor and control, and industrial automation networks. The DSP19.2FP supports RTUs with an EIA RS-232 or RS-485 serial port at speeds of 19200, 9600, 2400, and 1200 bps. The DSP19.2FP Fast Poll modem is designed to operate over 4-wire or 2-wire unconditioned leased lines or private metallic circuits. For optimum
performance, the modem employs QAM and FSK modulations to communicate over a variety of transmission lines.

The DCE DSP19.2FP Fast Poll modem is designed to operate with a wide range of AC or DC power supply voltages and temperatures. With proven reliability and ease of installation, the DSP19.2FP is ideal for point-to-point and point-to-multipoint polling networks, where high speed and low-network latency are critical for system performance.  

Reasons to Buy the DSP19.2 Fast Poll Modems

The Product

The DSP19.2FP fast poll modem utilizes the latest digital signal processing (DSP) technology to accomplish the high speed data rate at 19200, 9600, 4800, 2400 and 1200 bps. The DSP19.2 is the only product in the market (and the world) that can achieve a 17.4 ms training time at 19200 bps and 23 ms at 9600 bps or below. This performance is critical for multi-point polling applications.

The DSP19.2FP modem is 100% backward compatible with the Telenetics DSP9612FP plus the additional 19200 and 2400 bps operation.

The DSP19.2FP is implemented with a high speed DSP processor that is performing 60% faster than the DSP9612, the data rate is 100% faster than the DSP9612.

The DSP19.2FP has additional features to support SCADA equipment that does not provide the full RS-232 or RS-485 control signals.

The new modem has a smaller foot-print (30% smaller) and consumes less power.

The new modem will support 10 to 60 volts DC power supply, or can be powered by a factory provided AC to DC converter from 100 to 240 VAC or 100-400VDC.  This will reduce customer’s inventory of modems and saving cost by stocking only one model instead of two models.

The new modems will support both RS-232 and RS-485 interface.

The DSP19.2FP modems can be rack-mount (DSP19.2-RM) or can be panel mounted or DIN rail mounting with the optional DIN rail mounting kit.

The Support

The designers of the original Telenetics DSP9612 fast poll modems are now the founders and creators of the new DSP19.2 fast poll modems.  These engineers are the most knowledgeable people available today to help your technical issues.  They will stand behind the product and support of the DSP19.2 modems for any future applications, update and enhancement.  No update or enhancement is expected to be provided by the old DSP9612 products.  Problem solving and the ability to support new applications will be found only in the new DSP19.2FP products. 

Supports will be provided for repair, diagnose and analyze of your installation, network connections and equipment.

Technical support will be provided for optimum performance with your network and potentially save time and cost in your operation

Customize the product hardware and firmware to meet your specific applications or enhance your system performance.

The Bottom Line

Why buy an old product that was designed over 10 years ago that might face the possibility of obsolete components with questionable reliability which might affect the integrity of your network performance? The DSP19.2FP is specifically built for harsh environment and is most reliable for industrial applications that will be saving cost in the long run.
 

Specifications:

Data Rate Support
Data Speed:
19200, 9600, 2400 bps in fast poll mode
0-1800 bps in Bell 202T mode
0-1200 bps in ITU-V23 mode
Data Format: Asynchronous, 8 or 9 data bits
10- or 11-bit character with 1 or 2 stop bits
Modulation
QAM for 19200, 9600 and 2400 bps in fast poll mode
FSK for 0-1200 or 0-1800 for V23 or Bell 202T mode
Modem Equalizers
Automatic & adaptive equalizer
Enhanced fixed cable equalizers for extended range
Transmission Line Interface
Leased Line:
TELCO voice band 2- or 4-wire leased lines
Private or metallic circuits 2- or 4-wire, 19-26 AWG
Connector: 5-position terminal block with safety ground.
DTE/RTU Interface
The modem provides serial ports to support both the RS-232
and RS-485 interface standards:
RS-232 Interface
Connector: DB9-F
Signals: RTS, CTS, CD, TD, RD, DSR, SG
RS-485 Interface
Connector: RJ-11
Signals: 4-wire full-duplex:
TX+, TX-, RX+, RX-
  Front Panel Indicators & Controls
LED. Indicators:
RTS, CTS, TD, CD, RD, DSR, ALB, DLB
TEST Switch:
Push Button for Analog Loopback, Digital Loopback,
and Remote Digital Loopback
Power Supply Specifications
Three models support various power options:
Stand-alone: 90-264 VAC
Stand-alone: 10-48 VDC
Rack mount: RM16M module
Power Consumption:
Idle mode: 2 watts
Normal mode: 5 Watts, typical
Mechanical Specifications
Enclosure dimensions:
5.0”(W) x 6.75”(L) x 1.3” (H)
127mm(W) x 172mm(L) x 33mm(H)
Weight: 1.0 pound, without AC power module
Environment Specifications
Temperature:
Operation: -40o to + 85o C
Storage: -40o to +100o C
Humidity:
Up to 95 % non-condensing
Dry Contact Detection (optional)
2 optical isolated dry contact detections are provided for
external devices (consult DCE for additional information

Questions?  Give us a call toll free at +1 (888)-4WAN-LAN Mon.-Fri. 8:30 AM - 5:30 PM EDT/EST and one of our friendly and knowledgeable sales/support staff will be happy to assist you.